TIMESERT ® PROFESSIONAL DRAIN PLUG THREAD REPAIR KITS

Easily repair OIL PAN stripped or leaking threads!
Thread Repair kit sizes below will repair that drain plug size.

Steel threads are approximately 3 times the tensile strength of aluminum.
These kits can be used in any vehicle where the size is available.


    

BE SURE THERE ARE NO INSERTS PREVIOUSLY INSTALLED

Need to determine drain plug size? CLICK HERE:

Notes: How to minimize chips when repairing on vehicle.

Notes: Using 12 point sockets to hold squares on tools.

Master oil pan kit Metric p/n 6603300


INCH SIZES
 
Kit Size Description KIT PART NO. INSERT PART NO.

3/8-16
Oil Pan
 Case Thread Repair

Kit contains: Drill, Counterbore,
Tap, Driver, Tapguide,
5 inserts .312 length
661038182

1/2-20
Oil Pan
 Aluminum pans

Kit contains: Drill, Counterbore,
Tap, Driver, Tapguide,
5 inserts .400 length
66101225
Kit Size
Description
KIT PART NO.
INSERT PART NO.

1/2-20
Oil Pan
Tin pans Only

Will not work if the
pan has used
an oversized drain
plug.
 

“Tin Pan ONLY”
This kit reduces the hole size from
1/2-20 to 7/16-20
Kit contains: Counterbore, Driver tools,
5 inserts,
5 drain plugs with washers

66107629
Kit Size
Description
KIT PART NO.
INSERT PART NO.

3/4-10
Oil Pan
Aluminum pans

Kit contains: Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts .750 length

66103415
Kit Size
Description
KIT PART NO.
INSERT PART NO.

3/4-16
Oil Pan
Aluminum pans

Kit contains: Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts .650 length

66103460

METRIC SIZES

Kit Size
Description
KIT PART NO.
INSERT PART NO.

M8x1.25
Oil Pan
Aluminum pans

Kit contains: Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts 10mm length

66118125
Kit Size
Description
KIT PART NO.
INSERT PART NO.

M10x1.25
Oil Case

Kit contains: Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts 9mm length

66110127
Kit Size
Description
KIT PART NO.
INSERT PART NO.

M10x1.5
Oil Pan
Aluminum pans

Kit contains: Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts 9.4mm length

66110157
Kit Size
Description
KIT PART NO.
INSERT PART NO.

M12x1.25
Oil Pan
Aluminum pans

Kit contains: Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts 9mm length

66112121
Kit Size
Description
KIT PART NO.
INSERT PART NO.

M12x1.5
Oil Pan or Engine Case

Kit contains: Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts 6.7mm length
Commonly used in shorter drain plugs that use M12x1.5 some Indian motor cycles.
66112157
Kit Size
Description
KIT PART NO.
INSERT PART NO.

M12x1.5
Oil Pan or Engine Case

Kit contains: Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts 9.2mm length
Commonly used in BMW automotive and motorcycle/ATV applications
66112151
Size

Description
 
 PART NO.

Special Tool
M12x1/2
Drain Pan
seat recondition
Cutter

Used to clean seat if leaking
Use with 6601215C 6601217C 6601212C 6600122A kits.
"Driver tool required to use cutter"

click here for instruction:
 
66232176  
Kit Size
Description
KIT PART NO.
INSERT PART NO.

M12x1.75
Oil Pan
Aluminum pans

Commonly used in
GM , Ford and Mazda aluminum Oil Pans.

Commonly used in
General Motors vehicles
1999-2004 CK Engine ASM
V8/LR4/4.8V,LM7/5.3T,LQ4/6.0U
REPAIRS: General Motors vehicles
2003-2005 ST1 Engine ASM-4.3L V6/ LU3/4.3X

Kit contains: Drill,
Counterbore, Tap, Driver,
Tap guide,
5 inserts 12mm length
 
66112170

If your M12x1.75 oil drain pan already had a failed helicoil, the only option we can offer is to use the M14x1.5 drain plug kit p/n 6601415A to enlarge the thread size from the factory M12x1.75 to M14x1.5. 
You will need to purchase the larger M14x1.5 drain plug and washer from your local parts house.

Kit Size
Description
KIT PART NO.
INSERT PART NO.

M14x1.5
Honda and Acura
Oil Pan Repair
"Aluminum Pans"
Approved by Honda
 

M14x1.5
Oil Pan Repair
“Aluminum Pans”

Kit contains: Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts 9.4mm length
Drill has a large square, to turn the drill use a 1/2" 12 point socket or a tap socket
 p/n 66270940
 
66114153
Kit Size
Description
KIT PART NO.
INSERT PART NO.

M14x1.5
Volkswagen, Chrysler, Mazda and others.
Same as the 6601415C kit
but has slightly longer
insert, 12.7mm length.

M14x1.5
Oil Pan Repair
Kit contains: Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts 12.7mm length
Drill has a large square, to turn the drill use a 1/2" 12 point socket or a tap socket
 p/n 66270940
 
66114155
Kit Size
Description
KIT PART NO.
INSERT PART NO.
M14x1.5
Silver & Demming
drill with 1/2 shank
"Aluminum Pans"

Note on Drill
click here:
 

M14x1.5
Oil Pan Repair
“Aluminum Pans”
Must have clearance
for 6" OAL drill.
Kit contains: Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts 9.4mm length

Kit is useful for Motorcycles or ATV's
that have no interference issues
with the long 6" drill included.
 
6601415CS&D
instructions
66114153
Size
Description
PART NO.
Special Tool
M14x1.5
Drain pan
seat recondition cutter
Used to clean seat if leaking or not square to hole.
Use with 6601415C or 6601515A kits.
"Driver tool required to use cutter"
click here for instructions:
 
66234156
Kit Size
Description
KIT PART NO.
INSERT PART NO.

M14x1.5 REDUCER
Honda and Acura

"Tin Pans Only"
This kit WILL NOT repair oversized Drain plugs

M14x1.5
Oil Pan Repair
"TIN PANS ONLY"
This kit reduces the hole size from M14 x 1.5 to M12 x 1.5
click here for notes:
A new drain plug M12x1.5 is required from Honda.
 
6601485
66112151
Kit Size
Description
KIT PART NO.
INSERT PART NO.

M14x1.25
Oil Pan or engine case thread repair
 

Kit contains: Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts 11mm length
 commonly used in Suzuki motorcycle
 
66014125A
instructions
66144127
Kit Size
Description
KIT PART NO.
INSERT PART NO.

M16x1.5
Oil Pan thread repair Aluminum pans
Used in some jeep liberty diesel
 

Kit contains: Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts 12.7mm length
 
66116153
Kit Size
Description
KIT PART NO.
INSERT PART NO.

M16x1.5
Oil Pan thread repair Aluminum pans
 Used is some jeep liberty diesel

Kit contains: Short Drill 4.5 inch, Counterbore,Tap, Driver, Tap guide, 5 inserts 12.7mm length
NOTES: ON SHORTER DRILL 
6601615CSM
instructions
66116153
Kit Size
Description
KIT PART NO.
INSERT PART NO.

M18x1.5
 Oil Pan or transmission case thread repair

Kit contains: 6" Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts 10mm length
 Optional shorter drill available
 
66118151
Size
Description
PART NO.
Special Tool
M18x1.5
Oil pan
seat recondition cutter
Used to clean seat if leaking
Use with 6601815C kit.
"Driver tool required to use cutter"
 click here for instruction:
 
66238156
Kit Size
Description
KIT PART NO.
INSERT PART NO.

M20x1.5
Oil Pan
Aluminum pans

Kit contains: Drill, Counterbore,
Tap, Driver, Tap guide,
5 inserts 12mm length
 
66120151
Kit Size
Description
KIT PART NO.
INSERT PART NO.

Kit contains: Reamer, Tap, Driver,
Tap guide, 5 inserts 10mm length
Commonly used in Smart car Fortwo
 
66122151
Kit Size
Description
KIT PART NO.
INSERT PART NO.

Kit contains: Reamer, Tap, Driver,
Tap guide,5 inserts 10mm length

applications:
Volvo VHD class 8 trucks
with Volvo D12 & D13
engines
 
66124151
Volvo Truck
Kit Size
Description
KIT PART NO.
INSERT PART NO.

M12 - M18
M12x1.5,M12x1.25
M12x1.75,M14x1.5 M18x1.5
Master oil pan kit Metric
p/n 6603300

Kit contains: Drill, Counterbore, Tap,
Driver, Tap guide.
30 inserts of each size
 

6603300
Multiple length